HP J7949E manual Telnet Commands and Parameters 11

Table 3.4 Telnet Commands and Parameters (11 of 13)

IPX/SPX

Command	Description
ipx-config	Enables or disables IPX/SPX protocol operation on the print
	server. 0 disables, 1 (default) enables. For example,
	ipx-config 0 will disable IPX/SPX operation.
ipx-unitname	(Print Server Name) A user-assigned alphanumeric name
	assigned to the print server (31 characters maximum). By
	default, the name will be NPIxxxxxx, where xxxxxx are the
	last six digits of the LAN hardware address.
Address	(Read-only parameter) Identifies the IPX network and node
	numbers detected on the network, in the form
	NNNNNNNN:hhhhhhhh (hexadecimal), where
	NNNNNNNN is the network number and hhhhhhhh is the
	LAN hardware address of the print server.
ipx-frametype	Specifies the IPX frame type settings available for your print
	server model: AUTO (default), EN_SNAP, EN_8022,
	EN_8023, EN_II, TR_8022, TR_SNAP. For more
	information, see Chapter 9.
ipx-sapinterval	Specifies the time interval (1 to 3600 seconds) that the
	HP Jetdirect print server waits between Service Advertising
	Protocol (SAP) broadcasts on the network. The default is
	60 seconds. 0 disables SAP broadcasts.
ipx-mode	(Read-only parameter) Specifies the NetWare mode
	configured on the print server, eith RPRINTER or
	QSERVER mode.
ipx-nds-tree	An alphanumeric string, up to 31 characters, that specifies
	the NDS tree name for the print server.
ipx-nds-context	An alphanumeric string, up to 256 characters, that specifies
	the NDS context for the HP Jetdirect print server.
ipx-job-poll	Specifies the time interval (1 to 255 seconds) that the
	HP Jetdirect print server will wait to check for print jobs in
	a print queue. The default is 2 seconds.
pjl-banner	Enables or disables printing an IPX banner page through
ipx-banner	Printer Job Language (PJL). 0 disables banner pages. 1
	(default) enables banner pages.
pjl-eoj	Enables or disables IPX end-of-job notification through PJL.
ipx-eoj	0 disables, 1 (default) enables.
pjl-toner-low	Enables or disables IPX toner-low notification through PJL.
ipx-toner-low	0 disables, 1 (default) enables.

ENWW TCP/IP Configuration 83