HP J7949E manual Wizard Security Levels 2

Table 4.7	Wizard Security Levels (2 of 2)
Security Level		Description
Custom Security		This option proceeds through all available security settings
		supported by your print server. For more information on
		specific parameters and selections, see the tabs on the
		Mgmt. Protocols and Authorization menu pages under
		SECURITY.
		The Administrator Account page is used to enter the
		administrator password.
		The Web Mgmt. page (for full-featured print servers only)
		is used for HTTPS (secure HTTP) configuration, including
		certificates and encryption levels.
		The Management Tools page allows configuration of
		management protocols that are not secure (such as RCFG,
		Telnet and FTP firmware updates).
		SNMP Configuration pages are used to configure specific
		SNMP settings:
		● Enable SNMPv1/v2: Enable this option to allow
		management software that use SNMP v1/v2. If selected
		the SNMPv1/v2 Configuration page is displayed to
		configure SNMP community names.
		● Enable SNMPv3: (Full-featured print servers only)
		Enable this option to create an SNMP v3 account.
		Creating an SNMP v3 account is not recommended if
		you manage devices using HP Web Jetadmin. See
		SNMP.
		The Access Control page is used to set up an Access
		Control List, if desired to control host access to the device.
		The Print Protocols and Services page is used to enable
		or disable network printing, print services, and device
		discovery protocols that may affect security.
		The Configuration Review page displays all the current
		settings that may affect security. Click Finish to set your
		basic security selections.

ENWW Using the Embedded Web Server 116