Example. If you had an LPD printer and wanted to reset it at the start of each print job, you could set up a
First, set up the print queue:
a.Name a string: Type "reset_string" into the String Name field in row 1.
b.Define the string's value: Type "\1BE"
c.Name the queue: Type "clear_printer" into the Queue Name field in row 5.
d.Set up the prepend string: Type "reset_string" into the Prepend String field in row 5.
e.Leave the Append String field in row 5 blank.
f.Set the queue type: Using the
Then, set up the printer to use the queue, making sure to specify "clear_printer" when asked for a queue name. (For details of setting up the printer, refer to Chapter 5, “Configuring for LPD Printing”.) After that, any print jobs sent to the printer
Support Info
Use this page to configure links for Support assistance. You can designate a Support person and phone number of an administrator for this device, as well as URL addresses for
Refresh Rate
The refresh rate is the time period (in seconds) that the diagnostic pages will be automatically updated. The value '0' disables the refresh rate.
ENWW | Using the Embedded Web Server 112 |