HP J7949E manual Telnet Commands and Parameters 2, TCP/IP Main Command Description

Table 3.4 Telnet Commands and Parameters (2 of 13)

sys-location	Alpha-numeric string (up to 255 characters), typically used
	to identify a location.
sys-contact	Alpha-numeric string (up to 255 characters), typically used
	to identify the name of a network or device administrator.
ssl-state	Sets the print server’s security level for Web
	communications:
	1: Forced redirection to the HTTPS port. Only HTTPS
	(secure HTTP) communications can be used.
	2: Disable forced redirection to HTTPS. Both HTTP and
	HTTPS communications can be used.
security-reset	Reset security settings on the print server to factory default
	values. 0 (default) does not reset, 1 resets the security
	settings.
TCP/IP Main
Command	Description
host-name	Alphanumeric string (up to 32 characters), to assign or
	change the name of the network device. For example,
	“host-name printer1” assigns the name “printer1” to the
	device. The default host name is NPIxxxxxx, where xxxxxx
	are the last six digits of the LAN hardware (MAC) address.
ip-config	Specify the configuration method:
	manual: The print server will wait for IP parameters using
	manual tools (such as Telnet, embedded Web server,
	control panel, installation/management software). Status
	will be User Specified.
	bootp: The print server will send BOOTP requests on the
	network for dynamic IP configuration.
	dhcp: The print server will send DHCP requests on the
	network for dynamic IP configuration.
	auto_ip: The print server will be automatically configured
	with a unique link-local address 169.254.x.x.
ip	IP address for the print server, in dotted notation. For
	example:
	ip-config manual
	ip 192.168.45.39
	where ip-configspecifies manual configuration and ip
	manually sets the IP address 192.168.45.39 on the print
	server.
	Specifying 0.0.0.0 clears the IP address.
	If you exit and save a new IP address, it must be specified
	on the next Telnet connection.

ENWW TCP/IP Configuration 74