HP J7949E manual Security Settings 1

Security Settings

Information in this section of the Jetdirect configuration page is described in Table 9.2.

Table 9.2	Security Settings (1 of 2)
Message		Description
Admin Password:		Specifies whether an IP Administrator password has been
		configured on the print server. This password is shared by
		Telnet, the embedded Web server, and HP Web Jetadmin
		to control access to print server configuration parameters.
		Up to 16 case-sensitive, alphanumeric characters can be
		used.
		Not Set: An Administrator password has not been set.
		Set: An Administrator password has been set.
		(The password may be cleared from the print server through
		a cold reset.)
Secure Web:		Specifies the use of encrypted communications between a
		browser and the HP Jetdirect embedded Web server.
		Optional (HTTPS/HTTP): Allows unencrypted
		communications using standard HTTP ports, as well as
		encrypted communications using HTTPS (secure HTTP).
		HTTPS Required: Only encrypted communications on
		HTTPS is allowed.
Cert Expires:		Specifies the expiration date of the digital certificate for
		SSL/TLS encrypted security. The date is in UTC format (for
		example, “2002-10-02 12:45 UTC”).
		Not Applicable: Displayed if a digital certificate has not been
		installed.

ENWW HP Jetdirect Configuration Page 182