5.2.2 Ports
On the page, you can view the Port status, set up the Speed mode and enable the FDX flow control.
Status & Settings | Functions |
Link | To show the status of each port. When it is red, it means the connection is |
| down. Otherwise, it is green. |
Mode | Choose the Speed mode of port 10/100/1000, Half/Full. To disable the port, |
| choose Disable. If you set to auto speed, it will be |
FDX Flow Control | To Enable the FDX Flow control, click the check box. |
Max Frame length | To adjust the Frame length, enter the value you need. The larger value it is, |
| the better network performance you will have. Default is 1518. The |
| Maximum value is 9600. |
Apply | Click this button to save the configuration. |
Refresh | Click this button to refresh the latest status of ports. |
Note:
To make the maximum frame length control works properly, FDX Flow Control of the port must be enabled. The port link partner must also be enabled for supporting flow control.
