KTI Networks kgs-1601 manual The Front Panel, Speed, Duplex Mode, Media, Wiring

2.3 The Front Panel

The front panel of the switch is shown as below:

Port Operation

There are 16 * 1000Mbps RJ-45 (copper) ports on the front panel.

The auto-negotiation feature of the switch allows each port of the device running at one of the follow- ing operation modes:

Speed	Duplex Mode
10Mbps	Full Duplex
	Half Duplex
100Mbps	Full Duplex
	Half Duplex
1000Mbps	Full Duplex

All ports supports MDI/MDI-X auto crossover capability that is the port can connect either the PC or hub without crossover cable adjustment.

Wiring for 10/100/1000Mbps (Copper)

Following are the summaries of cabling required:

Media	Speed	Wiring
10/100/1000Mbps copper	10Mbps	Category 3,4,5 UTP/STP
	100Mbps	Category 5 UTP/STP
	1000Mbps	Category 5,5e UTP/STP

LEDs Definition

The rich diagnostic LEDs on the front panel can provide the operating status of individual port and whole system.

Power LED	This indicator lights green when the switch is receiving power; otherwise, it is
	off.
Port LEDs	Every RJ-45 port on the front panel relevant two LEDs (10/100M; 1000Mbps)
	for indicating the connection speed and activity status.

-8-