KTI Networks kgs-1601 manual Command Line Interface, Start-up and Terminal configuration

7. Command Line Interface

7.1 Start-up and Terminal configuration

To start-up the command line interface, connect a PC COM port to the RS-232 connector and activate a terminal emulation software (e.g. HyperTerminal of Windows.). The terminal emulation software should be set up as follows:

1.Data rate: 115200 baud

2.Data format: 8 data bits, 1 stop bit and no parity

3.Flow control: none.

4.Click the property icon, select settings, make sure that: The Function, arrow, and ctrl keys act as: Terminal keys Emulation: VT100

7.2 Login/Logout Procedures

To get access to the CLI, you will have to get the username and password for login. One set of default username/password is identified with admin/admin.

You may logout at any time and at any context level using the exit command.

Note:

It is suggested to change the default and configure a new username/password to prevent unau- thorized users from accessing to the device.

7.3 Command Hierarchy

The CLI (Command Line Interface) is hierarchical with two levels: a top level and a group level. The group level consists of the following groups:

•System

•Console

•Port

•MAC

•VLAN

•Aggr(Aggregation)

•QoS

•Mirror

•IP

-27-