HP J7949E manual Error Messages 4

Table 9.9	Error Messages (4 of 10)
Error Code and		Description
Message
1C PRINT SERVER		The file server does not have a print server object that
NOT DEFINED		corresponds to the specified NetWare node name. Use
		printer installation software, a NetWare utility (such as
		PCONSOLE), or other tool to create the print server object.
		When the HP Jetdirect print server is configured for multiple
		file servers, the error is only displayed on the configuration
		page if none of the file servers made the connection.
1D UNABLE TO		Remote Printer mode error: The HP Jetdirect print server
CONNECT TO		was unable to establish an SPX connection with the
SERVER		NetWare print server. Make sure that the NetWare print
		server is running and that all cables and routers are
		functioning correctly.
1E FAIL RESERVING		The SPX connection to the print server was lost when the
PRINTER NUM		HP Jetdirect print server attempted to reserve the printer
		number. This indicates a possible network problem, or a
		problem with the print server. Make sure all cables and
		routers are functioning correctly. Try restarting the print
		server.
1F ERR NEGOTIATING		A failure was detected when selecting the buffer size to be
BUFFER SIZE		used when reading print data from the file server. This may
		indicate a network problem.
		When the HP Jetdirect print server is configured for multiple
		file servers, the error is only displayed on the configuration
		page if none of the file servers was successfully connected.
20 UNABLE TO LOGIN		A failure was detected when the HP Jetdirect print server
		tried to log onto the file server. This could be caused by the
		print server object not existing on the file server, or by a
		security check that prevents the print server from logging in.
		Make sure the file server name and print server object name
		are correct. Use PCONSOLE to erase the password for the
		print server object. Create a new print server object.
		When the HP Jetdirect print server is configured for multiple
		file servers, the error is only displayed on the configuration
		page if none of the file servers made the connection.
21 UNABLE TO SET		A failure was detected when the HP Jetdirect print server
PASSWORD		tried to set the password for the print server object.
		(Whenever the HP Jetdirect print server is able to log in
		without a password, it sets the password automatically.) This
		indicates a networking or security problem. Create a new
		print server object.
		When multiple file servers are configured, the error is only
		displayed on the configuration page if none of the file servers
		were successfully connected.

ENWW HP Jetdirect Configuration Page 198