HP J7949E manual Error Messages 5

Table 9.9	Error Messages (5 of 10)
Error Code and		Description
Message
22 UNABLE TO		Queue Server mode error: The HP Jetdirect print server
CONNECT TO		could not establish an NCP connection to the file server.
SERVER		Make sure that the correct file servers are connected.
		When multiple file servers are configured, the error is only
		displayed on the configuration page if none of the file servers
		were successfully connected.
23 UNABLE TO		A failure was detected when the HP Jetdirect print server
ATTACH TO QUEUE		tried to attach to one of the queues assigned to the print
		server object. This may be because no servers are allowed
		to attach to this queue. There may also be a networking or
		security problem. Use PCONSOLE to make sure that
		servers are allowed to attach to the queue, to delete the print
		server object from the list of queue servers if you want the
		HP Jetdirect print server to service other queues, or to
		delete the queue and create a new one (the print server
		object must be added to the list of queue servers).
		When the HP Jetdirect print server is configured for multiple
		file servers, the error is only displayed on the configuration
		page if none of the file servers made the connection.
24 PSERVER CLOSED		The NetWare print server requested a termination of the
CONNECTION		connection with the HP Jetdirect print server. No error exists
		or is indicated. Make sure the NetWare print server is
		running, and restart it if necessary.
25 DISCONNECTING -		The SPX connection to the print server was lost after the
SPX TIMEOUT		connection had been made. This indicates a possible
		network problem, or a problem with the print server. Make
		sure all cables and routers are functioning correctly. Try
		restarting the print server.
26 UNKNOWN NCP		The HP Jetdirect print server encountered an unexpected
RETURN CODE		fatal error after it had successfully connected to the file
		server. A wide variety of failures could produce this error
		message, including a downed file server or a network
		router failure.
27 UNEXPECTED		The print server sent some data when the HP Jetdirect print
PSERVER DATA RCVD		server had not given its permission to do so. This indicates
		a possible print server problem, possibly a software
		problem.
28 OUT OF BUFFERS		The HP Jetdirect print server was unable to allocate a buffer
		from its internal memory. This indicates all buffers are busy
		due possibly to heavy broadcast traffic or large amounts of
		network traffic directed to the print server.

ENWW HP Jetdirect Configuration Page 199