HP J7949E manual Tftp Configuration File Parameters 3, TCP/IP Raw Print Ports

Table 3.3 TFTP Configuration File Parameters (3 of 10)

lpd-printing:

(lpd-config:, lpd:)

Enables or disables LPD (Line Printer Daemon) printing services on the Jetdirect print server. 0 disables, 1 (default) enables.

banner:

A port-specific parameter that specifies printing an LPD banner page. 0 disables banner pages. 1 (default) enables banner pages.

interlock:

(interlock-mode:)

Specifies whether an acknowledgement (ACK) on all TCP packets is required before the printer is allowed to close a Port 9100 print connection. A Port Number and Option value are specified. For HP Jetdirect embedded print servers, the Port Number is 1. Option value 0 (default) disables interlock, 1 enables. For example,

“interlock 1 1” specifies Port 1, interlock enabled.

buffer-packing:

(packing:)

Enables or disables buffer packing for TCP/IP packets.

0 (default): is normal, the data buffer is packed before sending to the printer.

1:disables buffer packing, data is sent to the printer as it is received. write-mode:

Controls the setting of the TCP PSH flag for device-to-client data transfers.

0 (default): disables this option, flag is not set.

1:all-push option. The push bit is set in all data packets.

2:eoi-push option. The push bit is set only for data packets that have an End-of-Information flag set.

mult-tcp-conn:

Enables or disables multiple TCP connections.

0 (default): allows multiple connections.

1: disables multiple connections.

TCP/IP Raw Print Ports

raw-port:

(addrawport:)

Specifies additional ports for printing to TCP port 9100. Valid ports are 3000 to 9000, which are application-dependent.

ENWW TCP/IP Configuration 48