HP J7949E manual FTP Login Example

FTP Login

To start an FTP session, enter the following command from a MS-DOS or UNIX command prompt:

ftp <IP address>

where <IP address> is the valid IP address or node name configured for the HP Jetdirect print server. See Figure 6.1

Figure 6.1 FTP Login Example

If the connection is successful, a Ready message will be displayed.

After a successful connection, the user is prompted for a login name and password. The default is the client’s login name. The Jetdirect FTP server will allow any user name. Passwords are ignored.

If login is successful, a message “230” will be displayed on the client system. In addition, the available HP Jetdirect ports for printing will be displayed. HP Jetdirect print servers supported in this guide provide a single port (Port 1). For a typical FTP printing session, see “Example of an FTP Session.”

ENWW FTP Printing 155