HP J7949E manual If your system uses Network Information Service

7.Edit the /etc/ethers file (/etc/rarpd.conf file in HP-UX 10.20) to add the LAN hardware address/station address (from the configuration page) and the node name for the HP Jetdirect print server. For example:

00:01:E6:a8:b0:00 laserjet1

Note	If your system uses Network Information Service
	(NIS), you need to incorporate changes to the NIS
	host and ethers databases.

8.Turn the printer on.

9.To verify that the card is configured with the correct IP address, use the ping utility. At the prompt, type:

ping <IP address>

where <IP address> is the assigned address from RARP.

10.If ping does not respond, see Chapter 8.

ENWW TCP/IP Configuration 65