HP J7949E manual Telnet Commands and Parameters 8

Table 3.4 Telnet Commands and Parameters (8 of 13)

tcp-mss	Specifies the maximum segment size (MSS) that the
	HP Jetdirect print server will advertise for use when
	communicating with local subnets (Ethernet MSS=1460
	bytes or more) or remote subnets (MSS=536 bytes):
	0: (default) All networks are assumed to be local (Ethernet
	MSS=1460 bytes or more).
	1: Use MSS=1460 bytes (or more) for subnets, and
	MSS=536 bytes for remote networks.
	2: All networks are assumed to be remote (MSS=536 bytes),
	except the local subnet.
	MSS affects performance by helping to prevent IP
	Fragmentation that may result in data retransmission.
tcp-msl	Specifies the maximum segment life (MSL) in seconds. The
	range is 5 - 120 seconds. The default is 15 seconds.
gw-disable	Specifies whether or not to automatically assign the device
	IP address as the gateway when a network gateway is not
	configured.
	0: A gateway using the device IP address will be assigned.
	1: A gateway is not assigned. The gateway address 0.0.0.0
	will be configured.
default-ip	Specifies the IP address to use when the print server is
	unable to obtain an IP address from the network during a
	forced TCP/IP reconfiguration (for example, when powered
	off/on or manually configured to use BOOTP/DHCP).
	DEFAULT_IP: sets the legacy default IP address
	192.0.0.192.
	AUTO_IP: sets a link-local IP address 169.254.x.x.
	The initial setting is determined by the IP address obtained
	when first powered on.
default-ip-dhcp	Specifies whether DHCP requests will be periodically
	transmitted when a legacy default IP address 192.0.0.192
	or link-local IP address 169.254.x.x has been automatically
	assigned.
	0: Disables DHCP requests.
	1 (default): Enables DHCP requests.

ENWW TCP/IP Configuration 80