HP J7949E manual Table B.1 HP Jetdirect Control Panel Menu 5, Ping Test

Table B.1 HP Jetdirect Control Panel Menu (5 of 7)

Menu Item	Options	Description of settings
	PING TEST	This test is used to check network
		communications. This test sends link-level
		packets to a remote network host, then waits
		for an appropriate response. To run a ping
		test, set the following items:
		● DEST IP: Specify the IP address of the
		remote host. A valid IP address must be
		entered. For example, 0.0.0.0 is not
		allowed.
		● PACKET SIZE: Specify the size of each
		packet, in bytes, to be sent to the remote
		host. The minimum is 64 (default) and the
		maximum is 2048.
		● TIMEOUT: Specify the length of time, in
		seconds, to wait for a response from the
		remote host. The default is 1 and the
		maximum is 100.
		● COUNT: Specify the number of ping test
		packets to send for this test. Select a
		value from 1 to 100. To configure the test
		to run continuously, select 0.
		● PRINT RESULTS: If the ping test was not
		set for continuous operation, you can
		choose to print the test results. Select
		YES to print results. If you select NO
		(default), results will not be printed.
		● EXECUTE: Specify whether to initiate the
		ping test. Selet YES to initiate the test, or
		NO to not run the test.

ENWW The HP Jetdirect Control Panel Menu 219