ZyXEL Communications Prestige 128MH, PSTN Router/Hub, Remote Node Configuration for LAN-to-LAN

Prestige 128MH	PSTN Router/Hub
Table 5-3.	Remote Node Profile Menu Fields for Leased Line Applications (continued)
Field		Description	Option
Session Option:		In these fields, select which filter set(s) you would like	Default=Blank
		to implement to filter the incoming and outgoing traffic
Input Filter Sets, Output		between this Remote Node and your Prestige. You
Filter Sets and Call Filter		can choose from 12 different filter sets. In addition,
Sets		you can link up to 4 filter sets together for further
		customization (for example, 1, 5, 9, 12).
		Note that spaces are accepted in this field.
		For more information on customizing your filter sets,
		see Chapter 9. The default is blank, that is, no filters
		defined.
Session Option:		This value specifies the number of idle seconds that	Default=300sec
		elapses before the Remote Node is automatically
Idle Timeout (sec)		disconnected. Idle seconds is the period of time where
		no data is passed between the Remote Node and
		your Prestige. Administrative packets such as RIP are
		not counted as data. The default is 300 seconds (5
		minutes).
Once you have completed filling in Menu 11.1.2 - Remote Node Profile for Leased Line Connection, press
[Enter] at the message [Press ENTER to Confirm … ] to save your selections, or press [Esc] at any time to
cancel your selections.

5-18Chapter 5 Remote Node Configuration for LAN-to-LAN