ZyXEL Communications Prestige 128MH PSTN Router/Hub, Edit IP Static Route Menu Fields

Prestige 128MH PSTN Router/Hub

Table 6-2 describes the fields for Menu 12.1 - Edit IP Static Route Setup.

Table 6-2.	Edit IP Static Route Menu Fields
Field		Description
Route Name		Enter a descriptive name for this route. This is for identification purpose only.
Active		This field allows you to activate/deactivate this static route.
Destination IP Address		This parameter specifies the IP network address of the final destination.
		Routing is always based on network number. If you need to specify a route to a
		single host, use a subnet mask of 255.255.255.255 in the subnet mask field to
		force the network number to be identical to the host ID.
IP Subnet Mask		Enter the subnet mask for this destination. Follow the discussion on IP subnet
		mask in this chapter.
Gateway IP Address		Enter the IP address of the gateway. The gateway is an immediate neighbor of
		your Prestige that will forward the packet to the destination. On the LAN, the
		gateway must be a router on the same segment as your Prestige; over
		PSTN/ISDN, the gateway must be the IP address of one of the Remote Nodes.
Metric		Same meaning as those in the Remote Node Setup (See Table 6-3).
Private		Same meaning as those in the Remote Node Setup (See Table 6-3).

6-8Chapter 6 TCP/IP Configuration for LAN-to-LAN