6. Configuration
bControl in Drivecom profile via Modbus and reference switching at the terminals
The command comes from Modbus.
The command comes either from Modbus or from the terminals. Input LI5 at the terminals is used to switch the reference between Modbus and the terminals.
The command is in Drivecom profile.
Configure the following parameters:
Parameter | Value | Comment |
Profile | Separate Drivecom profile | The run commands follow the Drivecom profile, and the command and |
|
| reference can come from different channels. |
|
|
|
Reference 1 configuration | Network card | Reference 1 comes from Modbus. |
|
|
|
Reference 1B configuration | Analog input 1 on the terminals | Reference 1B comes from input AI1 on the terminals. |
|
|
|
Reference switching | Input LI5 | Input LI5 switches the reference (1 ↔1B). |
|
|
|
Command 1 configuration | Network card | Command 1 comes from Modbus. |
|
|
|
Command switching | Channel 1 | Channel 1 is the command channel. |
|
|
|
Note: Reference 1B is directly connected to the drive reference limit. If switching is performed, the functions that affect the reference (summing, PID, etc) are inhibited.
Configuration via the graphic display terminal or the integrated display terminal:
Menu | Parameter | Value | ||
[1.6 | - COMMAND] | [Profile] (CHCF) | [Separate] (SEP) | |
|
|
|
| |
|
| [Ref.1 channel] (Fr1) | [Com. card] (nEt) | |
|
|
|
| |
|
| [Cmd channel 1] (Cd1) | [Com. card] (nEt) | |
|
|
|
| |
|
| [Cmd switching] (CCS) | [ch1 active] (Cd1) | |
|
|
|
| |
[1.7 | APPLICATION FUNCT.] | [Ref.1B channel] (Fr1b) | [Ref. AI1] (AI1) | |
[REFERENCE SWITCH.] |
|
| ||
[Ref 1B switching] (rCb) | [LI5] (LI5) | |||
|
| |||
|
|
|
| |
17
