|
| Prestige 128MH | PSTN Router/Hub |
Table | Remote Node Profile Menu Fields for Leased Line Applications (continued) | ||
|
|
|
|
Field |
| Description | Option |
|
|
|
|
Route |
| This field determines the protocols that your Prestige |
|
|
| will route. The choices for this field are determined by |
|
|
| the features enabled on your Prestige. |
|
|
|
|
|
Bridge |
| Bridging is used for protocols that are not supported | Press space bar |
|
| or not turned on in the previous Route field by your | to toggle |
|
| Prestige, for example, SNA. When bridging is | [Yes/No] |
|
| enabled, your Prestige will forward any packet that it | |
|
|
| |
|
| does not recognize to this Remote Node; otherwise, |
|
|
| the unrecognized packets are discarded. |
|
|
| The disadvantage of bridging is that it usually |
|
|
| generates large amounts of traffic. |
|
|
|
| |
Edit PPP Options | To edit the PPP options for this Remote Node, move | Press space bar | |
|
| the cursor to this field, use the space bar to select | to toggle |
|
| [Yes] and press [Enter] . This will bring you to Menu | [Yes] |
|
| 11.2 - Remote Node PPP Options. For more | then press |
|
| information on configuring PPP options, see the | [Enter] |
|
| section Editing PPP Options. |
|
|
|
|
|
Rem IP Addr |
| This is a required field [?] if [Route] is set to [IP]. Enter |
|
|
| the IP address of this Remote Node. |
|
|
|
| |
Edit IP/IPX/Bridge Options | To edit the parameters, select [Yes] and press [Enter]. | Press space bar | |
|
| This will bring you to Menu 11.3 - Remote Node | to toggle |
|
| Network Layer Options. For more information on this | [Yes] |
|
| screen, refer to the chapter pertaining to your specific | then press |
|
| protocol. | [Enter] |
|
|
|
|
Rem Password |
| This is a required field [?] if [Route] is set to [IP]. Enter |
|
|
| the password used when this Remote Node calls into |
|
|
| your Prestige. |
|
|
|
|
|
Chapter 5 Remote Node Configuration for |
|