ZyXEL Communications 128MH user manual Internal modems, Applications with internal 56K modem

	Prestige 128MH	PSTN Router/Hub
Table 2-5.	Async WAN Port Setup Menu Fields (continued)
Connection	For WAN Port 2 and 3 (LINE 1 and LINE 2 ports with internal 56K		[Switch (r.o.)]
Type	modems), this field is read only (r.o.). The connection type is set to
	[Switch] for Dial-up line applications only.
Phone	Enter the telephone number assigned to your modem line by your
				5551212
Number	telephone company. Note that your Prestige only accepts digits; do not		(example)
	include dashes and spaces in this field.
Device Type	For WAN Port 1 (Serial WAN port connected to external modem or		Space-bar to
	ISDN TA), use the space bar to select one of the following devices:			toggle
	[Modem / ISDN TA / X.25 PAD / 56K Modem]. A Device Type is selected			[Modem]
	for the WAN Port such that a Remote Node only picks up a free device of		[ISDN TA]
	the selected type to dial out. Only the WAN Ports of the same device		[X.25 PAD]
	type can be bundled. This field is not applicable if the Connection Type is		[56K Modem]
	set to [Leased].
Device Type	For WAN Port 2 and 3 (LINE 1 and LINE 2 ports with internal 56K		[56K Modem
	modems), this field is read only (r.o.). The device type is set to [56K			(r.o.)]
	Modem] which corresponds to the 56K modems built in your Prestige
	128MH.
Port Speed	Use the space bar to select the maximum speed of your Modem or ISDN		115200
	TA. Available speeds are:			(default)
	9600 / 19200 / 38400 / 57600 / 115200 / 230000 bps
	Note that the port speed is set to 56Kps for WAN port 2 and 3 with
	internal modems.
AT Command	Enter an AT command string to initialize the modem or ISDN TA attached		(Default: ats0=0)
String: Init	to the WAN Port. When the Connection Type is set to [Switch], you must
	enter an AT command (ats0=0) to disable auto answer (i.e. ats0=0) or
	your Prestige will answer the incoming phone call.
	Note the default AT command string [at&s95=1] for dial-up
	applications with internal 56K modem.
Advanced	To edit the Advanced Setup for this Modem/ISDN TA, move the cursor to			[Yes/No]
Setup	this field, use the space bar to select [Yes] and press [Enter]. This will
	bring you to Menu 2.1.1 - Advanced Setup.

When you complete this menu, press [Enter] to save your selections, or [Esc] to cancel. After you press [Enter], the Prestige uses the information you have saved to initialize the WAN Port and the connected Modem/ISDN TA.

Chapter 2 Hardware Installation & Initial Setup 2-17