Prestige 128MH PSTN Router/Hub
only use outgoing traffic to make this determination, and Receive will only use incoming traffic to make this determination.
If, after making the call to bring up a second port, the second port does not succeed in joining the Multilink Protocol bundle (because the remote device does not recognize the second call as coming from the same device), your Prestige will hang up the second port and continue with the first port alone.
Similarly, a third port will be brought up or dropped based on the target utility for the third port. The target utility for the third port is based on the Target Utility for the second port and Bandwidth Increment for Additional Ports. For example, when Bandwidth Increment for an Additional Port is 5 (Kbps) and the Target Utility for a second Port is
See Menu 11.2 - Remote Node PPP Options in Figure
5.1.3 Editing PPP Options
To edit the remote node PPP Options, move the cursor to the [Edit PPP Options] field in Menu
11.1- Remote Node Profile, and use the space bar to toggle and select [Yes], then press [Enter]. Menu 11.2 appears as shown in Figure
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Multiple Link Options:
BOD Calculation= Transmit or Receive
Min. Ports= 1
Max. Ports= 1
Target Utility for 2nd Port(Kbps)
Bandwidth increment for Additional Ports(Kbps)= 0
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Figure 5-3. Menu 11.2 - Remote Node PPP Options
Chapter 5 Remote Node Configuration for |