ZyXEL Communications Prestige 128MH, PSTN Router/Hub, Default Dial-in Setup Fields, Option

			Prestige 128MH	PSTN Router/Hub
Table 4-2.	Default Dial-in Setup Fields
Field		Description		Option
Telco Options: CLID Authen		This field sets the CLID authentication parameter for all
		incoming calls. There are three options for this field:
		• None - No CLID is required.		[None]
		• Required - Must provide CLID, or call is		[Required]
			disconnected.
		• Preferred - If the CLID is available then CLID will be		[Preferred]
			used to do authentication. If the CLID is not
			available the call will continue.
PPP Options: Recv. Authen		This field sets the authentication protocol used for
		incoming calls. User names and passwords are
		configured in the next section (Remote users/Dial-in
		Users Setup). Options for this field are:
		• CHAP/PAP - Your Prestige will try CHAP first, but		[CHAP/PAP]
			PAP will be used if CHAP is not available.
		•	CHAP - Use CHAP only.	[CHAP]
		•	PAP - Use PAP only.	[PAP]
		• None - Your Prestige tries to acquire CHAP/PAP		[None]
			first, but no authentication is required if CHAP/PAP
			is not available.
PPP Options: Mutual		Some vendors (for example, Cisco) implement a type of		[Yes/No]
Authen		mutual authentication. That is, the node that initiates the
		call will request a user name and password from the far
		end that they are dialing to. If the Remote Node that is
		dialing in implements this type of authentication, set this
		field to Yes.
PAP Login		This field will only be enabled if the Mutual Authen. Field
		is set to [Yes]. Enter in the login name to be used to
		respond to the far end’ s PAP authentication request. This
		field does not apply to CHAP authentication.
PAP Password		This field will only be enabled if the Mutual Authen. Field
		is set to [Yes]. Enter in the PAP password to be used to
		respond to the far end’ s authentication request. This field
		does not apply to CHAP authentication.

Chapter 4 Telecommuting 4-5