ZyXEL Communications 128MH user manual Note on Password Display

Prestige 128MH PSTN Router/Hub

Step 3. When the Submenu 23.1- System Security-Change Password appears, as shown in Figure 2-6, type in your previous system password, then press [Enter].

Menu 23.1 - System Security - Change Password

Old Password= XXXX

New Password= XXXX

Retype to confirm= XXXX

Enter here to CONFIRM or ESC to CANCEL:

Figure 2-6. Menu 23.1 - System Security - Change Password

Step 4. Enter your new system password and press [Enter].

Step 5. Re-type your new system password for confirmation and press [Enter].

You will now need to enter this password every time you attempt to access the SMT. In addition, the password is required when a network administrator attempts to access your Prestige via a Telnet connection.

Note on Password Display

As you type a password, the screen displays a (X) for each character you type.

Chapter 2 Hardware Installation & Initial Setup 2-11