Prestige 128MH PSTN Router/Hub
Refer to Table
Table | Advanced WAN Port Setup AT Commands Fields |
| |
|
|
|
|
Field |
| Description | Default |
|
|
| |
AT Command Strings: |
|
| |
| Dial | Enter the AT Command string to make a modem/ISDN TA | [atd] |
|
| connection. |
|
| Drop | Enter the AT Command string to drop a modem/ISDN TA | [~+++~ath] |
|
| connection. [~] represents a one second wait. |
|
| Answer | Enter the AT Command string to answer a phone call and make a | [ata] |
|
| modem/ISDN TA connection. |
|
|
|
| |
Drop DTR When Hang | When [Yes] is selected, your Prestige will drop the DTR signal | Toggle | |
Up |
| after sending out [AT Command String: Drop]. | [Yes/No] |
|
|
| (Default=[Yes]) |
|
|
| |
AT Response Strings: |
|
| |
CLID (Caller Line | Enter the keyword to capture Caller ID from the AT Response | [NMBR] | |
Identification) | String. Your Prestige will capture CLID from the AT Response |
| |
|
| String, if they are available. The keyword just before CLID is |
|
|
| recognized first; then captures CLID. CLID is required for Prestige |
|
|
| callback function or CLID authentication. Not every modem |
|
|
| supports CLID. |
|
| Called ID | Enter the keyword to capture Called ID from AT Response String. | [TO] |
| Speed | Enter the keyword to capture the Connection Speed from AT | [CONNECT] |
|
| Response String. |
|
|
|
|
|
When you have completed this menu, press [Enter] to return to Menu 2.1.
Chapter 2 Hardware Installation & Initial Setup |
|