ZyXEL Communications Prestige 128MH, PSTN Router/Hub, TCP/IP Configuration for LAN-to-LAN

		Prestige 128MH	PSTN Router/Hub
Table 6-1.	Remote Node Network Layer Options for a TCP/IP Configuration (continued)
Field		Description	Option
Metric		The metric represents the “cost” of transmission for routing	[1] to [16]
		purposes. IP routing uses hop count as the measurement of
		cost, with a minimum of [1] for directly connected networks.
		Enter a number that approximates the cost for this link. The
		number need not be precise, but it must be between [1] and
		[16]. In practice, [2] or [3] is usually a good number.
Private		This parameter determines if the Prestige will include the route	[Yes/No]
		to this Remote Node in its RIP broadcasts. If set to [Yes], this
		route is kept private and not included in RIP broadcast. If [No],
		the route to this Remote Node will be propagated to other hosts
		through RIP broadcasts.
RIP		This parameter determines how your Prestige handles RIP	(Default=Both)
		(Routing Information Protocol), and the default is [Both].
		If set to [Both], your Prestige will broadcast its routing table on	[Both]
		the WAN, and incorporate RIP broadcasts by the other router
		into its routing table.
		If set to [In Only], your Prestige will not broadcast its routing	[In Only]
		table on the WAN.
			[Out Only]
		If set to [Out Only], your Prestige will broadcast its routing table
		but ignores any RIP broadcast packets that it receives.
		If set to [None], your Prestige will not participate in any RIP	[None]
		exchange with other routers.
		Usually, you should leave this parameter at its default of [Both]
		and let RIP propagate the routing information automatically.
Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.
Press [Enter] at the message [Press ENTER to Confirm...] to save your selections, or press [Esc] at any
time to cancel your selections.

Chapter 6 TCP/IP Configuration for LAN-to-LAN 6-5