Prestige 128MH PSTN Router/Hub
5.2.2 Editing Leased Line PPP Options
To edit the remote node PPP Options in the case of a Leased Line connection, move the cursor to the [Edit PPP Options] field in Menu 11.2 - Remote Node Profile, and use the space bar to toggle and select [Yes], then press [Enter]. Menu 11.2 appears as shown in Figure
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Figure
Table
contains instructions on how to configure the PPP options fields.
Table
Field | Description | Option |
|
|
|
Encapsulation | Select CCP (Compression Control Protocol) for the |
|
| PPP or MP link. There are two options in this field. |
|
|
|
|
| • Standard PPP - Standard PPP options will be | [Standard PPP] |
| used. |
|
| • CISCO PPP - Cisco PPP options will be used. | [CISCO PPP] |
|
|
|
Compression | Turn on the Stac Compression. The default for this | [On/Off] |
| field is Off. | (Default = Off) |
|
| |
|
|
|
Chapter 5 Remote Node Configuration for |