Prestige 128MH PSTN Router/Hub
The following Table
Table | System Maintenance Menu Diagnostic Test Options | |
|
|
|
Fields |
| Description |
|
|
|
Drop WAN Port |
| This command will drop the call in the specified WAN port. |
|
|
|
Reset WAN Port |
| This command will reset the specified WAN port. |
|
| |
Redirect to WAN Port | This command will redirect SMT (System Manager Terminal) to the specified WAN | |
|
| port. To redirect to a WAN Port, you must set [Port Speed] of the WAN Port (in |
|
| Menu 2) to match [Terminal Baud Rate] in Menu 24.2. |
|
| |
Internet Setup Test | This test checks to see if your Internet access configuration has been done | |
|
| correctly. When this option is chosen, your Prestige will PING the Internet IP |
|
| Address. If everything is working properly, you will receive an appropriate |
|
| response. Otherwise, note the error message and consult your network |
|
| administrator. |
|
|
|
Ping Host |
| This diagnostic test pings the host which determines the functionality of the TCP/IP |
|
| protocol on your system. |
|
|
|
Reboot System |
| This option reboots the system. This serves to implement any changes that may |
|
| have been recently added to your system. |
|
|
|
Command Mode |
| This option allows the user to enter the command mode. This mode allows you to |
|
| diagnose and test your Prestige using a specified set of commands. |
|
|
|
Manual Call |
| This provides a way for the users of the Prestige to place a manual call to a |
|
| Remote Node. This tests the connectivity to that Remote Node. When you use this |
|
| command, you will see traces displayed on the screen showing what is happening |
|
| during the call setup and protocol negotiation. |
|
|
|