Prestige 128MH PSTN Router/Hub
The following Table
Table | TCP/IP Filter Rule Menu Fields |
| |
|
|
|
|
Field |
| Description | Option |
|
|
|
|
Active |
| In this field, you can make the filter rule active or inactive. | [Yes/No] |
|
|
|
|
IP Protocol |
| Protocol refers to the IP specific number of the protocol. | |
|
| The range for this value should be between 0 and 255. For |
|
|
| example, 6 refers to the TCP protocol. |
|
|
|
|
|
IP Source Route |
| Determine, Yes or No, whether to check the source route. | [Yes/No] |
|
|
|
|
Destination: IP |
| In this field, enter the destination IP Address of the packet | [a.b.c.d] where |
Addr |
| you wish to filter. The address is usually written in dotted | |
|
| decimal notation such as a.b.c.d where a, b, c, and d are |
|
|
| numbers between 0 and 255. |
|
|
|
|
|
Destination: IP |
| In this field, enter the IP mask that will be used to mask the | IP Address |
Mask |
| bits of the IP Address given in Destination: IP Addr. |
|
|
|
| |
Destination: Port # | Enter the destination port of the packets that you wish to | ||
|
| filter. The range of this field is 0 to 65535. |
|
|
|
| |
Destination: Port # | In this field, you can select what comparison quantifier you | [None/Less/Greater/E | |
Comp |
| wish to use to compare to the value given in Source: Port #. | qual/Not Equal] |
|
|
|
|
Source: IP Addr |
| In this field, enter the source IP Address of the packet you | IP Address |
|
| wish to filter. |
|
|
| The address is usually written in dotted decimal notation | [a.b.c.d] where |
|
| ||
|
| such as a.b.c.d where a, b, c, and d are numbers between | |
|
|
| |
|
| 0 and 255. |
|
|
|
|
|
Source: IP Mask |
| In this field, enter the IP mask that will be used to mask the | IP Mask |
|
| bits of the IP Address given in Source: IP Addr. |
|
|
|
|
|
Source: Port # |
| Enter the source port of the packets that you wish to filter. | |
|
| The range of this field is 0 to 65535. |
|
|
|
|
|
Source: Port # |
| This field is dependent upon the IP Protocol field. | [Yes/No] |
Comp |
| This field will be inactive (N/A) unless the value in that field |
|
|
|
| |
|
| is 6 (TCP protocol). In this field you determine what type of |
|