ZyXEL Communications 128MH user manual Power On Your Prestige, Initialize SMT

Prestige 128MH PSTN Router/Hub

2.4Power On Your Prestige

At this point, you should have connected the computer, the external modem or ISDN TA (WAN), the telephone lines (LINE 1,2), the Ethernet cable, and the power supply. You can now power on your Prestige by plugging the AC adapter to the appropriate power outlet.

Step 1. Initialize SMT

When you power on your Prestige, the Router/Hub will perform several internal tests and will also perform a PSTN/ISDN line initialization. After this initialization, the Prestige will display the SMT (System Management Terminal) interface and ask you to press [Enter] to continue, as shown in Figure 2-2.

Copyright (c) 1994 - 1997 ZyXEL Communications Corp. ethernet address: 00:a0:c5:01:23:45

Wan port init ... done Modem 0 init . inactive Modem 1 init . inactive Modem 2 init . inactive

Press ENTER to continue...

Figure 2-2. Power-On Display

2-6Chapter 2 Hardware Installation & Initial Setup