ZyXEL Communications 128MH user manual 6Chapter 5 Remote Node Configuration for LAN-to-LAN

Prestige 128MH PSTN Router/Hub

Table 5-1.	Remote Node Profile Menu Fields for Dial-up Line Applications (continued)
Field		Description	Options
Outgoing:	Pri(mary)	Both the Primary Phone number and the Secondary
	Sec(ondary)	Phone number refer to the number that your Prestige will
	Phone	dial to connect to the Remote Node. Your Prestige will
	Numbers	always call the Remote Node using the Primary Phone
		number first.
		If the Primary Phone number is busy or does not answer,
		your Prestige will call the Secondary Phone number if
		available. Once connected, your Prestige will use the
		BACP (Bandwidth Allocation Control Protocol) to
		establish the second B-channel if Multilink PPP is
		enabled, and the Remote Node supports MP and BACP.
		Some areas require dialing the pound sign # before the
		phone number for local calls. A # symbol may be
		included at the beginning of the Primary Phone number
		or Secondary Phone number as required.
Device Type		Use the space bar to choose the following selections:	[Modem]
			[ISDN TA]
		Modem / ISDN TA / X.25 PAD / 56K Modem.
			[X25 PAD]
		A Remote Node only picks up a free device of the	[56K Modem]
		selected Device Type to dial out. Only the devices of the
		same device type will be bundled.
Route		This fields determines the protocols that your Prestige
		will route. The choices for this field are determined by
		the features enabled on your Prestige.
Bridge		Bridging is used for protocols that are not supported or	Press space bar
		not turned on in the previous Route field by your	to toggle
		Prestige, for example, SNA. When bridging is enabled,	[Yes/No]
		your Prestige will forward any packet that it does not
		recognize to this Remote Node; otherwise, the
		unrecognized packets are discarded.
		The disadvantage of bridging is that it usually generates
		large amounts of traffic.

5-6Chapter 5 Remote Node Configuration for LAN-to-LAN