ZyXEL Communications Prestige 128MH PSTN Router/Hub, IPX Filter Rule Menu Fields, 9-13

		Prestige 128MH PSTN Router/Hub
Table 9-7.	IPX Filter Rule Menu Fields
Field		Description
IPX Packet Type		Enter the IPX packet type value of the packet you wish to filter. This
		value should be two hex-bytes.
Destination/Source Network #		Enter the four hex-byte destination/source network numbers of the
		packet that you wish to filter.
Destination/Source Node #		Enter in the six hex-byte value for the destination/source node
		number of the packet you wish to filter.
Destination/Source Socket #		Enter the destination/source socket number of the packets that you
		wish to filter. This should be a 4-byte hex value.
Destination/Source Socket #		You can select what comparison quantifier you wish to use to
Comp		compare to the value given in Destination Socket # and Source
		Socket #.

Operation

This field is only active if one of the Socket # fields is 0452 or 0453 indicating SAP and RIP packets. There are seven options for this field which determines the operation for the IPX packet.

•None.

•RIP Request.

•RIP Response.

•SAP Request.

•SAP Response.

•SAP Get Nearest Server Request.

•SAP Get Nearest Server Response

Once you have completed filling in Menu 21.1.3 - IPX Filter Rule, press [Enter] at the message [Press Enter to Confirm] to save your selections, or press [Esc] to cancel. This data will now be displayed on Menu 21.1 - Filter Rules Summary.

Chapter 9 Filter Configuration 9-13