ZyXEL Communications Prestige 128MH, PSTN Router/Hub, TCP/IP Configuration for LAN-to-LAN

Prestige 128MH	PSTN Router/Hub
Table 6-1.	Remote Node Network Layer Options for a TCP/IP Configuration
Field		Description	Option
Route		Make sure [IP] is among the protocols in the Route field.	[IP]
			([IP/IPX/IP+IPX])
IP Address		Enter the IP address of the gateway at the remote site (in this
		case, headquarters). If the remote router is using a different IP
		address than the one entered here, your Prestige will drop the
		call.
Edit IP/IPX/Bridge		Press the space bar to change it to [Yes] and press [Enter] to	[Yes]
		go to Menu 11.3 - Remote Node Network Layer Options Menu.	([Yes/No])
Rem IP Address		This will show the IP address you entered for this Remote Node
		in the previous menu.
Rem IP Subnet		Enter the subnet mask for the remote network.
Mask
My WAN Addr		Some implementations, especially the UNIX derivatives,
		require hosts on both ends of the PSTN/ISDN link to have
		separate addresses from the LAN, and that the addresses must
		have the same network number. If this is the case, enter the IP
		address assigned to the WAN port of your Prestige.
		Note that this is the address assigned to your local Prestige,
		not the remote router.
		(See Figure 6-3 for an explanation of My WAN Addr. With
		Sample IP Addresses)
Single User		This field should be set to [Yes] to enable the Single User	[Yes/No]
Account		Account (Network Address Translation) feature for this site.
		Use the space bar to toggle between [Yes] and [No]. See
		Chapter 3 - Internet Access Application for more information on
		the Single User Account feature.
Server IP address		If you are using the Single User Account feature and you want
		to make a server on your LAN (for example, a Web server)
		accessible to outside users, enter that servers IP address here.

6-4Chapter 6 TCP/IP Configuration for LAN-to-LAN