ZyXEL Communications Prestige 128MH PSTN Router/Hub, 5. Bridge Static Route Menu Fields

Prestige 128MH PSTN Router/Hub

The following Table 8-5 describes the Bridge Static Route Menu.

Table 8-5. Bridge Static Route Menu Fields

Field	Description
Route Name	For identification purposes enter a name for the bridge static route.
Active	Indicates whether the static route is active or not.
Ether Address	Enter the MAC address of the destination device that you wish to bridge your packets
	to.
IP Address	If available, enter the IP address of the destination device that you wish to bridge your
	packets to.
Gateway Node	Enter the number (1-4) of the Remote Node that is linked to this static route. When an
	incoming packet’ s destination Ether (MAC) address matches the value entered above,
	then it will trigger a call to this Remote Node.

Once you have completed filling in this menu, press [Enter] at the message [Press Enter to Confirm] to save your selections, or press [Esc] to cancel your selection.

Chapter 8 Bridge Configuration for LAN-to-LAN 8-7