ZyXEL Communications Prestige 128MH, PSTN Router/Hub, Default Dial-in Setup Fields continued

Models: 128MH

1 178
Download 178 pages 55.01 Kb
Page 76
Image 76
Default Dial-in Setup Fields (continued)

Prestige 128MH

PSTN Router/Hub

 

Table 4-2.

Default Dial-in Setup Fields (continued)

 

 

 

 

 

Field

 

Description

Option

 

 

 

Multiple Link Options: Max

Enter the maximum number of ports in a connection

Default = 1

Port

 

between your Prestige and the Remote Dial-in User.

 

 

 

 

 

Callback Budget

 

This field will set a budget callback time for all the

Default = 0

Management: Allocated

Remote Dial-in Users. The default for this field is [0] for

 

Budget (min)

 

no budget control.

 

 

 

 

 

Callback Budget

 

This field will set the time interval to reset the above

 

Management: Period (hr)

callback budget control.

 

 

 

 

Dial-In IP Address Supplied

If set to [Yes], it tells your Prestige to allow a remote host

(Default = Yes)

By: Dial-in User

 

to specify its own IP address. This is to prevent the

 

 

 

remote host from using an invalid IP address and

[Yes/No]

 

 

potentially disrupting the whole network.

 

 

 

If set to [No], the remote host must use the IP address

 

 

 

assigned by your Prestige from the IP pool, configured

 

 

 

below.

 

 

 

 

Dial-In IP Address Supplied

This field tells your Prestige to provide the remote host

[Yes/No]

By: IP Pool

 

with an IP address from the pool. This field is required if

 

 

 

Dial-In IP Address Supplied By: Dial-in User is set to [No].

(Default = No)

 

 

You can configure this field even if Dial-in User is set to

 

 

 

[Yes], in which case your Prestige will accept the IP

 

 

 

address if the remote peer specifies one; otherwise, an IP

 

 

 

address is assigned from the pool.

 

 

 

 

IP Pool: IP Start Addr

This field is active only if you selected [Yes] in the Dial-In

 

 

 

IP Address Supplied By: IP Pool field.

 

 

 

The IP pool contains contiguous IP addresses and this

 

 

 

field specifies the first one in the pool.

 

 

 

 

 

IP Count (1-3)

 

In this field, enter the number ([1], [2], or [3]) of the

[1], [2], [3]

 

 

addresses in the IP Pool. For example, if the starting

 

 

 

address is 192.168.135.5 and the count is [2], then the

 

 

 

pool will have 192.68.135.5 and 192.68.135.6

 

 

 

 

 

4-6Chapter 4 Telecommuting

Page 76
Image 76
ZyXEL Communications Prestige 128MH, PSTN Router/Hub, Default Dial-in Setup Fields continued, Telecommuting, Option