ZyXEL Communications 128MH user manual Configuring the Prestige for RADIUS Authentication

Prestige 128MH PSTN Router/Hub

You can obtain a copy of the RADIUS software, along with documentation for the server, at

http://www.livingston.com/Tech/FTP/pub-le-radius.shtml

or at

ftp://ftp.livingston.com/pub/le/radius/

Follow the included instructions to install the server on your UNIX- or NT-based server.

Once you have installed the server, you will need to edit the [dictionary] file in the RADIUS configuration directory (which will usually be [/etc/raddb]). Using any text editor, add the following lines to the [dictionary] file:

# Zyxel proprietary attributes
ATTRIBUTE	Zyxel-Callback-Option	192 integer
VALUE	Zyxel-Callback-Option	None	0
VALUE	Zyxel-Callback-Option	Optional	1
VALUE	Zyxel-Callback-Option	Mandatory	2

# Callback phone number source
ATTRIBUTE	Zyxel-Callback-Phone-Source	193 integer
VALUE	Zyxel-Callback-Phone-Source	Preconfigured	0
VALUE	Zyxel-Callback-Phone-Source	User	1

These changes allow the RADIUS server to be used with ZyXEL CLID authentication, as described in the section below.

11.1.2 Configuring the Prestige for RADIUS Authentication

To configure your Prestige to use the RADIUS server set up in the previous section, select option 23, System Security, from the Main Menu. This will bring you to Menu 23 - System Security. Then from this menu, select option 2, External Server to bring you to Menu 23.2 - System

11-2Chapter 11 System Security