|
| Prestige 128MH | PSTN Router/Hub |
Table | Remote Node Profile Menu Fields for | ||
|
|
|
|
Field |
| Description | Options |
|
|
| |
Edit PPP Options | To edit the PPP options for this Remote Node, move the | Press space bar | |
|
| cursor to this field, use the space bar to select [Yes] and | to toggle |
|
| press [Enter] . This will bring you to Menu 11.2 - | [Yes] |
|
| Remote Node PPP Options. For more information on | then press |
|
| configuring PPP options, see the section Editing PPP | [Enter] |
|
| Options. |
|
|
|
|
|
IP Addr |
| This is a required field [?] if [Route] is set to [IP]. Enter |
|
|
| the IP address of this Remote Node. |
|
|
|
| |
Edit IP/IPX/Bridge Options | To edit the parameters, select [Yes] and press [Enter]. | Press space bar | |
|
| This will bring you to Menu 11.3 - Remote Node Network | to toggle |
|
| Layer Options. For more information on this screen, | [Yes] |
|
| refer to the chapter pertaining to your specific protocol. | then press |
|
|
| [Enter] |
|
|
| |
Edit Script Option | To edit the parameters, select [Yes] and press [Enter]. | [Yes] | |
|
| This will bring you to Menu 11.4 - Remote Node Script | then press |
|
| Options. | [Enter] |
|
|
|
|
Telco Options:
Allocated Budget (min)
Period (hr)
This field will set a budget outgoing call time for the Remote Node. The default for this field is [0] for no budget control.
This field will set the time interval to reset the above outgoing call budget control.
Default = 0
Session Option: | In these fields, select which filter set(s) you would like to | Default=Blank |
| implement to filter the incoming and outgoing traffic |
|
Input Filter Sets, | between this Remote Node and your Prestige. You can |
|
Output Filter Sets and | choose from 12 different filter sets. In addition, you can |
|
Call Filter Sets | link up to 4 filter sets together for further customization |
|
| (for example, 1, 5, 9, 12). |
|
| Note that spaces are accepted in this field. |
|
| For more information on customizing your filter sets, see |
|
| Chapter 9. The default is blank, that is, no filters defined. |
|
|
|
|
Chapter 5 Remote Node Configuration for |
