ZyXEL Communications 128MH user manual Async WAN Port Setup Menu Fields

Prestige 128MH PSTN Router/Hub

•Figure 2-9b displays Menu 2.1 when configuring WAN port 2 and 3 internally connected to the built-in 56K modem LINE 1 and LINE 2 respectively.

Menu 2.1 - Async WAN Port Setup

Modem Name= ZyXEL

Active= Yes

Connection Type= Switch (r.o.)

Phone Number=

Device Type= 56K Modem (r.o.)

Port Speed= 115200

AT Command String:

Init=ats0=0W2&fs95=1

Advanced Setup= No

Press ENTER to Confirm or ESC to Cancel:

Figure 2-9b. Menu 2.1 - Async WAN Port Setup for WAN Port 1,2 (LINE 1,2)

Table 2-5 describes how to configure the WAN port 1 with the external modem or ISDN TA parameters, and WAN port 2 and 3 with the internal 56K modem line parameters.

Table 2-5.	Async WAN Port Setup Menu Fields
Field	Description	Example
Modem Name	Enter a descriptive name for the Modem or ISDN TA connected to this
			ZyXEL
	WAN Port.
Active	Set to [Yes] to activate a WAN port, then your Prestige will initialize the	Press space-bar
	WAN Port and the attached Modem or ISDN TA. When a WAN Port is	to toggle
	deactivated, it has no effect on the operation of your Prestige, even
	though its profile is still kept in the database, and can be activated in the	[Yes/No]
	future.
Connection	For WAN Port 1 (Serial WAN port connected to external modem or	Press space-bar
Type	ISDN TA), select the connection type for your particular application.	to toggle
	Select [Switch] for Dial-up application or [Leased] for Leased Line	[Switch/Leased]
	Modem application.

2-16Chapter 2 Hardware Installation & Initial Setup