Defining GARP Timers Using CLI Commands

This table summarizes the equivalent CLI commands for defining GARP timers as displayed in the GARP Timers page.

Table 7-18. GARP Timer CLI Commands

CLI Command

Description

 

 

garp timer {join leave leaveall}

Adjusts the GARP application join,

timer_value

leave, and leaveall GARP timer values.

 

 

The following is an example of the CLI commands:

console(config)# interface ethernet 1/e1 console(config-if)# garp timer leave 900 console(config-if)# end

console# show gvrp configuration ethernet 1/e11

GVRP Feature is currently Disabled on the device.

Maximum VLANs: 223

Port(s)

GVRP-

Registration

Dynamic VLAN

Timers

(milliseconds)

 

Status

 

Creation

Join

Leave

Leave All

-------

--------

------------

------------

-------

------

---------

1/e11

Disabled

Normal

Enabled

200

900

10000

324

Configuring Switch Information

Page 324
Image 324
Dell 3548 manual Console# show gvrp configuration ethernet 1/e11, Gvrp