Modifying Storm Control Port Parameters

1Open the Storm Control page.

2Modify the fields.

3Click Apply Changes

The Storm Control port parameters are saved to the device.

Displaying the Port Parameters Table

1Open the Storm Control page.

2Click Show All.

The Storm Control Settings Table opens.

Figure 7-26. Storm Control Settings Table

In addition to the fields in the Storm Control page, the Storm Control Settings Table contains the following additional fields:

Unit No. — Indicates the stacking member for which the Storm Control information is displayed.

Copy Parameters from Port — Indicates the specific port from which Storm Control parameters are copied.

Copy To — Copies the Storm Control parameters to the selected ports.

Copying Parameters in the Storm Control Settings Table

1Open the Storm Control page.

2Click Show All.

The Storm Control Settings Table opens.

3Select the port from which settings are copied from the Copy Parameters from Port field.

310

Configuring Switch Information

Page 310
Image 310
Dell 3548 manual Storm Control Settings Table