Dell 3548 manual 376

Defining Voice VLAN Global Parameters Using CLI Commands

The following table summarizes the equivalent CLI command for defining Voice VLAN global parameters.

Table 7-33.Voice VLAN Global Parameters CLI Commands

CLI Command	Description
voice vlan id vlan-id	To enable the voice VLAN and to configure the voice VLAN ID, use the
no voice vlan id	voice vlan id command in global configuration mode. To disable the
	voice VLAN, enter the no form of this command.
voice vlan cos cos	To set the voice VLAN Class Of Service, use the voice vlan cos
no voice vlan cos	command in global configuration mode. To return to default, use the
	no form of this command.
voice vlan aging-timeout minutes	To set the voice VLAN aging timeout, use the voice vlan aging-timeout
no voice aging-timeout	command in global configuration mode. To return to default, use the
	no form of this command.
voice vlan enable	Use the voice vlan enable interface configuration command to enable
	automatic voice VLAN configuration for a port. Use the no form of this
	command to disable automatic voice VLAN configuration.

show voice vlan [ ethernet interface port-channel port-channel-number]

Use the show voice vlan EXEC command to display the voice VLAN status.

The following is an example of some of the CLI commands:

Switch# show voice vlan

Aging timeout: 1440 minutes

OUI table

MAC Address - Prefix Description

00:E0:BB3COM

00:03:6BCisco

00:E0:75Veritel

00:D0:1EPingtel

00:01:E3Siemens

00:60:B9NEC/Philips

376

Configuring Switch Information