Copying Parameters in the GARP Timers Table
1Open the GARP Timers page.
2Click Show All.
The GARP Timers Table opens.
Figure 7-34. GARP Timers Table
3Select the interface in the Copy Parameters from field from either the Port or LAG
4Select the Copy to check box to define the interfaces to which the GARP timer definitions (copied from Copy Parameters from field) are copied, or click Select All to copy the definitions to all ports or LAGs.
5Click Apply Changes.
The parameters are copied to the selected ports or LAGs in the GARP Timers Table, and the device is updated.
