The following table contains the IGMP port and LAG members management settings:
Table
Port Control | Definition |
|
|
D | The port/LAG has joined the Multicast group dynamically in the Current Row. |
|
|
S | Attaches the port to the Multicast group as static member in the Static Row. |
| The port/LAG has joined the Multicast group statically in the Current Row. |
|
|
F | Forbidden. |
|
|
Blank | The port is not attached to a Multicast group. |
|
|
Adding Bridge Multicast Addresses
1Open the Bridge Multicast Group page.
2Click Add.
The Add Bridge Multicast Group page opens.
Figure 7-72. Add Bridge Multicast Group
3Define the VLAN ID and New Bridge Multicast Address fields.
4Toggle a port to S to join the port to the selected Multicast group.
5Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
6Click Apply Changes.
The bridge Multicast address is assigned to the Multicast group, and the device is updated.
