386

Figure 7-69. LAG Membership

The LAG Membership page contains the following fields:

•LACP — Aggregates the port to a LAG, using LACP.

•LAG — Adds a port to a LAG, and indicates the specific LAG to which the port belongs.

Adding Ports to a LAG or LACP

1Open the LAG Membership page.

2In the LAG row (the second row), toggle the button to a specific number to aggregate or remove the port to that LAG number.

3In the LACP row (the first row), toggle the button under the port number to assign either the LACP or the static LAG.

4Click Apply Changes.

The port is added to the LAG or LACP, and the device is updated.

Adding Ports to LAGs Using CLI Commands

The following table summarizes the equivalent CLI commands for assigning ports to LAGs as displayed in the LAG Membership page.

Table 7-37. LAG Membership CLI Commands

CLI Command	Description

channel-group port-	Associates a port with a port-channel. Use the no form of
channel-number mode	this command to remove the channel-group configuration
{on auto}	from the interface.

show interfaces port-channel	Displays port-channel information.
[port-channel-number]