Dell 3548 manual Defining Lacp Parameters

Ports in a Link Aggregated group (LAG) can contain different media types if the ports are operating at the same speed. Aggregated links can be manually or automatically configured by enabling Link Aggregation Control Protocol (LACP) on the relevant links.

This section contians the following topics:

•"Defining LACP Parameters" on page 383

•"Defining LAG Membership" on page 385

Defining LACP Parameters

The LACP Parameters page contains fields for configuring LACP LAGs. Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports with the same speed. Aggregated Links can be manually setup or automatically established by enabling Link Aggregation Control Protocol (LACP) on the relevant links.

To open the LACP Parameters page, click Switch → Link Aggregation → LACP Parameters in the tree view.

Figure 7-67. LACP Parameters

The LACP Parameters page contains the following fields:

•LACP System Priority (1-65535) — The LACP priority value for global settings. The possible range is 1- 65535. The default value is 1.

•Select a Port — The port number to which timeout and priority values are assigned.

Configuring Switch Information

383