Dell 3548 manual Console# show syslog-servers

Table 6-14. Global Log Parameters CLI Commands

CLI Command	Description
logging on	Enables error message logging.

logging {ipv4-address ipv6-address hostname} Logs messages to a syslog server. For a list of the Severity levels,

[port port] [severity level] [facility facility] see "Log Severity Levels" on page 117. [description text]

logging console level	Limits messages logged to the console based on severity.
logging buffered level	Limits syslog messages displayed from an internal buffer
	(RAM) based on severity.
logging file level	Limits syslog messages sent to the logging file based on
	severity.
clear logging	Clears logs.
clear logging file	Clears messages from the logging file.
show syslog servers	Displays the syslog servers settings.

The following is an example of the CLI commands:

console(config)# logging on console(config)# logging console errors console(config)# logging buffered debugging console(config)# logging file alerts console(config)# end

console# clear logging file Clear Logging File [y/n]y

Console# show syslog-servers
Device Configuration
-----------------------------
IP address	Port	facility	Severity	Description
----------	----	--------	--------	-----------

1.1.1.1	514	local7	info
fe80::11%vlan1	514	local7	info
3211::22	514	local7	info

Configuring System Information

117