Displaying the Multiple Hosts Table

1Open the Multiple Hosts page.

2Click Show All.

The Multiple Hosts Table opens.

Figure 7-4. Multiple Hosts Table

The Multiple Hosts Table displays the following additional field:

Unit No. — Selects a stacking member.

Enabling Multiple Hosts Using the CLI Commands

The following table summarizes the equivalent CLI commands for enabling the advanced port based authentication as displayed in the Multiple Hosts page.

Table 7-2. Multiple Hosts CLI Commands

CLI Command

Description

 

 

dot1x multiple-hosts

Allows multiple hosts (clients) on an 802.1X-

 

authorized port that has the dot1x port-control

 

interface configuration command set to auto.

dot1x single-host- violation {forward discard discard- shutdown}[trap seconds]

Configures the action to be taken when a station, whose MAC address is not the client (supplicant) MAC address, attempts to access the interface.

The following is an example of the CLI Command.

Console(config)# interface ethernet 1/e1

Console(config-if)# dot1x multiple-hosts

270

Configuring Switch Information

Page 270
Image 270
Dell 3548 manual 270