Global Configuration Mode

Global Configuration commands apply to system features, rather than a specific protocol or interface.

To access Global Configuration mode, at the Privileged EXEC Mode prompt, type the configure command and press <Enter>. The Global Configuration mode displays as the device host name followed by (config) and the pound sign #.

console(config)#

To list the Global Configuration commands, enter a question mark at the command prompt.

To return from Global Configuration mode to Privileged EXEC mode, type the exit command or use the <Ctrl>+<Z> key combination.

The following example illustrates how to access Global Configuration mode and return back to the Privileged EXEC mode:

console#

console# configure

console(config)# exit

console#

For a complete list of the CLI modes, see the Dell™ PowerConnect™3524/P and PowerConnect 3548/P CLI Guide.

76

Using Dell OpenManage Switch Administrator

Page 76
Image 76
Dell 3548 manual Global Configuration Mode, Consoleconfig#