Dell 3548 manual 345

Displaying the MSTP VLAN to Instance Mapping Table

1Open the Spanning Tree MSTP Settings page.

2Click Show All to open the MSTP VLAN to Instance Mapping Table.

Figure 7-43. MSTP VLAN to Instance Mapping Table

Defining MST Instances Using CLI Commands

The following table summarizes the equivalent CLI commands for defining MST instance groups as displayed in the Spanning Tree MSTP Settings page.

Table 7-23. MSTP Instances CLI Commands

CLI Command	Description
spanning-tree mst configuration	Enters MST Configuration mode.
instance instance-id{add remove} vlan vlan-	Maps VLANs to the MST instance.
range
name string	Sets the configuration name.
revision value	Sets the configuration revision number
spanning-tree mst instance-idport-priority	Sets the priority of a port.
priority
spanning-tree mst instance-idpriority priority	Sets the device priority for the specified spanning tree instance.
spanning-tree mst max-hops hop-count	Sets the number of hops in an MST region before the BPDU is
	discarded and the information held for a port is aged.

Configuring Switch Information

345