Resetting the Device
1Open the Reset page.
2Select a unit in the Reset Unit Number field.
3Click Apply Changes.
A confirmation message displays.
4Click OK.
The device is reset. After the device is reset, a prompt for a user name and password is displayed.
5Enter a user name and password to reconnect to the Web Interface.
Resetting the Device Using the CLI
The following table summarizes the equivalent CLI commands for performing a reset of the device via the CLI:
Table
CLI Command | Description |
|
|
reload | Reloads the device. |
|
|
The following is an example of the CLI command:
console# reload
You haven't saved your changes. Are you sure you want to continue? (Y/N)[N] Y
This command will reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)[N] Y
Configuring SNTP Settings
The switch supports the Simple Network Time Protocol (SNTP). SNTP assures accurate network switch clock time synchronization up to the millisecond. Time synchronization is performed by a network SNTP server. SNTP operates only as a client, and cannot provide time services to other systems.
The switch can poll the following server types for the server time:
•Unicast
•Anycast
•Broadcast
Configuring System Information
101
