•Reactivate Suspended Port — Reactivates a port if the port has been disabled through the locked port security option.
–Checked — Reactivates the port.
–Unchecked — Maintains the port’s operational status.
•Operational Status — Indicates the port operational status. Possible field values are: Suspended — The port is currently active, and is not receiving or transmitting traffic. Active — The port is currently active and is receiving and transmitting traffic.
Disable — The port is currently disabled, and is not receiving or transmitting traffic.
•Admin Speed — The configured rate for the port. The port type determines what speed setting options are available. Admin speed can only be designated when the port is disabled. The possible field values are:
–10M — Indicates the port is currently operating at 10 Mbps.
–100M — Indicates the port is currently operating at 100 Mbps.
–1000M — Indicates the port is currently operating at 1000 Mbps.
•Current Port Speed — The actual synchronized port speed (bps).
•Admin Duplex — The port duplex mode in bps.
–Full — Indicates that the interface supports transmission between the device and the client in both directions simultaneously.
–Half — Indicates that the interface supports transmission between the device and the client in only one direction at a time.
•Current Duplex Mode — The synchronized port duplex mode.
•Auto Negotiation — Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate, duplex mode and flow control abilities to its partner.
–Enable — Enables Auto Negotiation on the port.
–Disable — Disables Auto Negotiation on the port.
•Current Auto Negotiation — The current Auto Negotiation setting.
•Admin Advertisement — Defines the
–Max Capability — Indicates that all port speeds and Duplex mode settings are accepted.
–10 Half — Indicates that the port advertises for a 10 mbps speed port and half duplex mode setting.
–10 Full — Indicates that the port advertises for a 10 mbps speed port and full duplex mode setting.
–100 Half — Indicates that the port advertises for a 100 mbps speed port and half duplex mode setting.
–100 Full — Indicates that the port advertises for a 100 mbps speed port and full duplex mode setting.
–1000 Full — Indicates that the port advertises for a 1000 mbps speed port and full duplex mode setting.
